108 MS 362, MS 362 C
: Take out the screw (1).
: Pull out the tank housing (1).
– Inspect the tank housing and
replace if necessary
Only transfer those parts from the
old tank housing that are not
included with the replacement – see
parts list.
1
0001RA468 TG
0001RA21 TG
1
Installing
: Slide the tank housing (1), narrow
part (2) first, between the two
halves of the crankcase.
The filter base is not shown in the
illustration.
: Push the peg (1) past the recess
(arrow) and secure with the
buffer.
– Reassemble all other parts in the
reverse sequence.
– Tightening torques, b 2.5
0001RA20 TG
2
1
0001RA402 TG
1
To Next Page
Loading...
