Stihl MS 362 Manual

68 MS 362, MS 362 C
: Pry out the AV spring (1).
: Remove the complete bracket
(2).
: Unscrew the AV spring (1).
: Unscrew the bearing plug (2).
– Check the AV spring and plug,
replace if necessary.
0001RA209 TG
1
2
2
1
0001RA210 TG
: Screw home the bearing plug (1)
as far as stop.
: Screw the AV spring (2) into the
bracket (arrow) as far as stop.
– Reassemble in the reverse
sequence.
– Tightening torques, b 2.5
9.3 AV Spring on Fuel Tank
– Remove AV spring from
handlebar, b 9.4
– Remove the stop buffer, b 9.5
: Take out the screw (1).
: Lower the tank housing (2).
1
2
0001RA211 TG
1
2
0001RA212 TG
: Pry out the AV spring (1).
: Unscrew the AV spring (1).
: Unscrew the bearing plug (2).
– Check the AV spring and plug,
replace if necessary.
Installing
: Screw home the bearing plug (2)
as far as stop.
: Screw the AV spring (1) into the
plug (arrow) on the tank housing
as far as stop.
0001RA051 TG
1
0001RA213 TG
2
1
0001RA207 TG
1
2

Stihl MS 362 Specifications

General

Displacement	59.0 cm³
Powerhead Weight	5.6 kg
Chain pitch	3/8"
Vibration level (left/right)	3.5/3.5 m/s²
Weight	5.6 kg
Guide Bar Length	40-50 cm (16-20 in)
Oil Capacity	325 cc
Weight (without cutting equipment)	5.6 kg
Oil tank volume	325 cc