Stihl MS 362 Manual

5MS 362, MS 362 C
2. Specifications
2.1 Motor
MS 362
Displacement: 59 cm
3
Bore: 47.0 mm
Stroke: 34.0 mm
Engine power to ISO 7293: 3.4 kW (4.6 bhp)
at 9,500 rpm
Maximum permissible engine speed
with bar and chain: 14,000 rpm
Idle speed: 2,800 rpm
Clutch: Centrifugal clutch without
linings
Clutch engages at: 3,500 rpm
Crankcase leakage test
at gauge pressure: 0.5 bar
under vacuum: 0.5 bar
2.2 Fuel System
Carburetor leakage test at
gauge pressure:
0.8 bar
Operation of tank vent at
gauge pressure:
0.5 bar
Fuel: refer to instruction manual
2.3 Ignition System
Air gap between ignition
module and fanwheel: 0.20...0.30 mm
Spark plug (suppressed): NGK BPMR 7 A
BOSCH WSR6F
Electrode gap: 0.5 mm
2.4 Chain Lubrication
Speed-controlled oil pump with reciprocating piston and
manual flow control
Oil delivery rate:
Ematic oil pump
9.5 (+/- 2.5) cm³/min
at 10,000 rpm
Oil delivery rate:
Adjustable oil pump
5.5...15.0 (+/- 3.0) cm³/min at
10,000 rpm

Stihl MS 362 Specifications

General

Displacement	59.0 cm³
Powerhead Weight	5.6 kg
Chain pitch	3/8"
Vibration level (left/right)	3.5/3.5 m/s²
Weight	5.6 kg
Guide Bar Length	40-50 cm (16-20 in)
Oil Capacity	325 cc
Weight (without cutting equipment)	5.6 kg
Oil tank volume	325 cc