Stihl MS 362 Manual

32 MS 362, MS 362 C
Machines with quick chain
tensioner
– Remove the side plate, b 5.2
: Push stud puller (1) 5910 893
0506 over the collar stud as far as
it will go and unscrew the stud (2)
counterclockwise.
: Before installing, coat the thread
(1) of the collar stud with Loctite,
b 15
– Fit collar stud and tighten it down
firmly.
– Tightening torques, b 2.5
– Reassemble all other parts in the
reverse sequence.
0001RA072 TG
1
2
0001RA073 TG
1

Stihl MS 362 Specifications

General

Displacement	59.0 cm³
Powerhead Weight	5.6 kg
Chain pitch	3/8"
Vibration level (left/right)	3.5/3.5 m/s²
Weight	5.6 kg
Guide Bar Length	40-50 cm (16-20 in)
Oil Capacity	325 cc
Weight (without cutting equipment)	5.6 kg
Oil tank volume	325 cc