EasyManua.ls Logo

Supermicro SSE-G24-TG4 - Queue Configuration

Supermicro SSE-G24-TG4
318 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-52
Queue Configuration
Clicking the QUEUE CONFIGURATION tab brings up the VLAN CLASS OF SERVICE (COS)
Q
UE SCHEDULING AND BANDWIDTH CONTROL page (Figure 5-38), which configures VLAN
COS queue scheduling and bandwidth control services. The parameters for this page
are shown in Table 5-31.
Figure 5-39. VLAN Class of Service (COS) Queue Scheduling and Bandwidth Control
Table 5-32. VLAN COS Queue Scheduling and Bandwidth Control Page Parameters
Parameter Description
Port
This list of ports allows you to select from the port index for your selected
algorithm.
Scheduling Algorithm
The SCHEDULING ALGORITHM can be selected as one of the following:
Strict Priority
Round Robin
Weighted Round Robin
Deficit Round Robin
Default Priority
(Ingress)
This parameter allows you to select between 0 to 7 for your default priority value.
Weight
This parameter allows you to select between 0 to 15 for your COS Queue
WEIGHT value.
Min Bandwidth This parameter configures minimum bandwidth between 1 to 262143.
Max Bandwidth This parameter configures maximum bandwidth between 1 to 262143.
COS Queue Flag Use this parameter to set a flag for this queue.

Table of Contents

Other manuals for Supermicro SSE-G24-TG4

Related product manuals