5-33
Chapter 5: Web Based Management Utility
Community
Clicking the COMMUNITY tab brings up the SNMP COMMUNITY SETTINGS page
(Figure 5-21), which allows you to add SNMP managers or remove existing managers..
The parameters for this page are shown in Table 5-15.
Figure 5-21. SNMP Community Settings Page
Table 5-15. SNMP Community Settings Page Parameters
Parameter Description
Community index This parameter sets the COMMUNITY INDEX identifer.
Community name This parameter sets the COMMUNITY NAME string.
Security Name This parameter sets the User Name String.
Context Name
This parameter sets the CONTEXT NAME that the management information is
accessed from when using the community string, which is specified by the
corresponding instance of the SNMP community name.
Transport Tag This parameter sets the T
RANSPORT TAG Identifer.
Storage Type This parameter sets the Volatile Storage or Non-volatile Storage setting.
To Next Page
Loading...
