5-3
Chapter 5: Web Based Management Utility
This User Name and Password are both used for accessing the switch through the web
for switch configuration. The entered user name and password are validated at the
switch end.
After logging in, you will be taken to the H
OME page of the utility. See Section 5-3 for
further details.
5-3 Home Page
The HOME page (Figure 5-2) contains links and menus for going to all other control
pages in the Supermicro Switch web-based interface utility. A list of controls for this
page is shown in Table 5-1. The basic page structure of the H
OME page is duplicated for
all subsequent sub-pages of the Supermicro Switch web-based interface utility.
NOTE: The SSE-G24-TG4, SSE-G48-TG4, SSE-X24S/R, SSE-X3348S/R and
SSE-X3348T/R switches from Supermicro share a common management interface
(including the associated feature set) with Supermicro’s SBM-GEM-X2C and
SBM-GEM-X3S+ Layer 2/3 1/10G Ethernet switches for the Supermicro Blade System.
In this manual you will see many screen shots of pages showing the name of the
SBM-GEM-X2C in the upper left hand corner. With the exception of this name, these
screens will all have the same structure and appearance in your SSE-G24-TG4,
SSE-G48-TG4, SSE-X24S/R, SSE-X3348S/R and SSE-X3348T/Rswitch.
Figure 5-2. Home Page
To Next Page
Loading...
