1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-176
Dynamic Multicast
The Dynamic Multicast link allows you to configure Dynamic Multicast through the
following pages:
• Dynamic Multicast
• Port Settings
Dynamic Multicast
Clicking the DYNAMIC MULTICAST tab brings up the DYNAMIC MULTICAST GLOBAL
C
ONFIGURATION page (Figure 5-150), which allows you to enable or disable the dynamic
multicast feature. The parameters for this page are shown in Table 5-128.
Figure 5-150. Dynamic Multicast Global Configuration Page
Table 5-128. Dynamic Multicast Global Configuration Page Parameters
Parameter Description
Context Displays the context identifier, which is a read only field.
Dynamic Multicast
Status
Enable or disable dynamic multicast.
To Next Page
Loading...
