5-97
Chapter 5: Web Based Management Utility
LLDP
The LLDP link has the following configuration pages:
• Global Settings
• Interface Settings
Global Settings
Clicking the GLOBAL SETTINGS tab brings up the GLOBAL SETTINGS page (Figure 5-79),
which helps you to configure LLDP global parameters. The parameters for this page are
shown in Table 5-62.
Port State
This parameter indicates the current state of the port with respect to Link
Aggregation. The possible states are
• Up in Bundle — The Port is an active member of the Port Channel.
• Up Individual — The Port is not a member of any Port Channel but its
Oper-Status is Up.
• Standby — The Port is a member of the Port Channel but is currently in
standby state.
• Down — The Ports Oper-Status is Down.
Aggregation State Specifies the state whether Static or Dynamic..
Figure 5-79. LLDP Global Settings Page
Table 5-61. LA Port Settings Page Parameters (Continued)
Parameter Description
To Next Page
Loading...
