5-43
Chapter 5: Web Based Management Utility
Events
Clicking the EVENTS tab brings up the EVENT CONFIGURATIONS page (Figure 5-31), which
configures RMON events. The parameters for this page are shown in Table 5-24.
Figure 5-31. Event Configuration Settings Page
Table 5-24. Event Configuration Page Parameters
Parameter Description
Index This parameter specifies the index to the Events table.
Description This parameter specifies a brief description of the event.
Type
This parameter specifies the event configured. This can be a Log, an SNMP
Trap, Both, or None. For the event type to display, TRAP and Log and TRAP
Community must be configured.
Community
This parameter specifies the SNMP community string used for this trap. This is
relevant when an SNMP trap is requested for an event. For event type to display,
TRAP and Log and TRAP Community must be configured. Also make sure the
configured community is active before adding an event on that community.
Owner This parameter indicates the owner of this event.
Last Time Sent Denotes the time this event entry last generated an event.
To Next Page
Loading...
