5-153
Chapter 5: Web Based Management Utility
Multi-Exit Disc
Clicking the MULTI-EXIT DISC tab brings up the BGP MED CONFIGURATION page
(Figure 5-128), which allows you to configure the MED value for routes learnt from BGP
peers. The parameters for this page are shown in Table 5-109.
Admin Status This parameter displays the admin status of the entry.
Status This parameter specifies the status of the entry.
Figure 5-128. BGP MED Configuration Page
Table 5-109. BGP MED Configuration Page Parameters
Parameter Description
MED ID
This parameter specifies the index for this table. The allowed value ranges
between 1 and 10.
Remote AS
This parameter specifies the AS number from which the route update is
received. The allowed value ranges between 0 and 65535.
IP Address Prefix This parameter specifies the IP address prefix for which the update is received.
IP Address Prefix
Length
This parameter is used to calculate the subnet. The allowed value ranges
between 0 and 32.
Intermediate AS This parameter represents the intermediate AS between the BGP peers.
Table 5-108. BGP Peer Configuration Page Parameters (Continued)
Parameter Description
To Next Page
Loading...
