1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-40
Trap Manager
Clicking the TRAP MANAGER tab brings up the SNMP TRAP SETTINGS page (Figure 5-28),
which configures the set of management targets that must receive notifications. The
parameters for this page are shown in Table 5-22.
Privacy Key
Privacy Key is an indication of whether or not messages sent on behalf of this
user to/from the SNMP are protected from disclosure.
Storage Type Storage Type can be configured as Volatile or Non-Volatile.
Figure 5-28. SNMP Trap Settings Page
Table 5-22. SNMP Trap Settings Page Parameters
Parameter Description
Notify Name Notify Name is a unique identifier associated with the entry.
Notify Tag
Notify Tag contains a single tag value, which is used to select entries in the
Target Address table. Any entry in the Target Address table that contains a tag
value equal to the value of an instance of this Trap Manager, is selected.
Notify Type
The type of notification of the SNMP Trap Settings can be configured as Trap or
Inform.
Storage Type Storage Type can be configured as Volatile or Non-Volatile.
Table 5-21. SNMP Security Settings Page Parameters (Continued)
Parameter Description
To Next Page
Loading...
