1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-160
RRD
The RRD link allows you to manage the Route Redistribution with the help of the
following pages:
• Basic Settings
• BGP
• RIP
• OSPF
Basic Settings
Clicking the BASIC SETTINGS tab brings up the RRD BASIC SETTINGS page
(Figure 5-134). The parameters for this page are shown in Table 5-115.
Figure 5-134. RRD Basic Settings Page
Table 5-115. RRD Basic Settings Page Parameters
Parameter Description
AS Number
This parameter is used to configure the Router AS number to which this switch
belongs.
Router ID This parameter represents the Router ID of the switch.
To Next Page
Loading...
