5-21
Chapter 5: Web Based Management Utility
IP Auth Manager
Clicking the IP AUTH MANAGER tab brings up the IP AUTHORIZED MANAGER page
(Figure 5-12), which allows you to configure allowed management nodes for managing
the switch. The parameters for this page are shown in Table 5-7.
Timeout
The time for which the switch will wait for a response from the TACACS server
before closing the connection is specified with this parameter. It is configurable in
seconds, with the valid range is from 4 to 15 and the default as 5-seconds..
Key Type
Specifies the Key Type for the TACACS server. The allowed key type is 0 or 7.
The default key type is 0. The key 0 type key is plain text. For key 7 type, the
user must provide the encrypted key string.
Secret Key
This specifies the encryption key for the given TACACS server. It has a
32-character input limit, and the factory default is blank.
Figure 5-12. IP Authorized Manager Page
Table 5-7. IP Authorized Manager Page Parameters
Parameter Description
IP Address
This specifies the IP address of the manager. The default address of 0.0.0.0
indicates “Any Manager”.
Subnet Mask This specifies the sub-network mask for the specified IP address.
Table 5-6. TACACS+ Server Configuration Page Parameters
Parameter Description
To Next Page
Loading...
