5-161
Chapter 5: Web Based Management Utility
BGP
Clicking the BGP tab brings up the RRD BGP CONFIGURATION page (Figure 5-135),
which allows you to re-distribute the routes that are learnt through other routing
protocols to BGP. The parameters for this page are shown in Table 5-116.
Figure 5-135. RRD BGP Configuration Page
Table 5-116. RRD BGP Configuration Page Parameters
Parameter Description
BGP Status This parameter enables or disables redistribution for BGP.
Default Metric
This parameter specifies the metric for the routes that are being re-distributed.
The possible values are between 0 and 2147483647. The default value is 0.
Import
With this parameter you can choose to import Direct routes, Static routes, RIP
routes and/or OSPF routes to BGP.
To Next Page
Loading...
