5-173
Chapter 5: Web Based Management Utility
Interface Configuration
Clicking the INTERFACE CONFIGURATION tab brings up the IGMP SNOOPING INTERFACE
C
ONFIGURATION page (Figure 5-147), which configures IGMP snooping interface specific
parameters. The parameters for this page are shown in Table 5-125.
Figure 5-147. IGMP Snooping Interface Configuration Page
Table 5-125. IGMP Snooping Interface Configuration Page Parameters
Parameter Description
VLAN ID
This parameter specifies the VLAN ID for which the configuration is to be
performed.
IGMP Snooping
Status
This parameter specifies the status of IGMP snooping in the Switch, which can
be enabled or disabled for a specific VLAN.
Operating Version
This parameter specifies the operating version of the IGMP snooping switch for a
specific VLAN. Options are version 1 or version 2 or version 3.
Fast Leave
This parameter indicates whether the fast leave processing for a specific VLAN,
is to be enabled or disabled.
Querier Status
This parameter specifies whether the IGMP snooping switch is enabled or
disabled as a querier for a specific VLAN. The value ranges between 60 and
600.
Querier Interval
(secs)
This parameter specifies the time period for which general queries are sent by
the IGMP snooping switch, when configured as querier on a VLAN.
Router Port List This parameter specifies the router port list for a specific VLAN.
Current Version This parameter specifies the working IGMP Version on the given VLAN.
To Next Page
Loading...
