EasyManua.ls Logo

Supermicro SSE-G24-TG4 - Prefix Settings

Supermicro SSE-G24-TG4
318 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-121
Chapter 5: Web Based Management Utility
Prefix Settings
Clicking the PREFIX SETTINGS tab brings up the PREFIX CONFIGURATION page
(Figure 5-100). The parameters for this page are shown in Table 5-82.
Valid Flag This parameter specifies if the Valid Lifetime Flag is Variable or Fixed.
Preferred Flag This parameter specifies if the Preferred Lifetime Flag is Variable or Fixed.
Figure 5-100. Prefix Configuration Page
Table 5-82. Prefix Configuration Page Parameters
Parameter Description
Interface VLAN ID
This parameter specifies the index of the VLAN Interface. The allowed value
ranges between 1 to 255.
Prefix This parameter indicates the IPv6 address prefix to be advertised in RA.
Prefix Length This parameter indicates the P
REFIX LENGTH (in bits).
Prefix Profile ID
This parameter specifies index to the IPv6 address profile table. The allowed
value ranges between 0 to 200.
Table 5-81. Address Profile Settings Page Parameters (Continued)
Parameter Description

Table of Contents

Other manuals for Supermicro SSE-G24-TG4

Related product manuals