1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-126
DHCP Relay
The DHCP Relay link helps you to manage the DHCP relay in the switch through the
following two pages:
• Basic Settings
• Interface Conf
Basic Settings
Clicking the BASIC SETTINGS tab brings up the DHCP RELAY CONFIGURATION page
(Figure 5-105), which displays the various parameters for configuring the DHCP relay.
The parameters for this page are shown in Table 5-87.
Figure 5-105. DHCP Relay Configuration Page
Table 5-87. DHCP Relay Configuration Page Parameters
Parameter Description
Service DHCP-Relay
This parameter specifies the DHCP relay status that can be enabled or disabled
in the switch using this field.
IP DHCP Relay
Information Option
You can enable/disable this field to control the processing related to the Relay
Agent Information options.
DHCP Server
Address
This parameter indicates the IP address of the DHCP Server to which the Relay
Agent needs to forward the packets from the client.
To Next Page
Loading...
