1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-222
Traffic
Clicking the TRAFFIC link brings up the LLDP TRAFFIC page (Figure 5-189), which
displays LLDP error information. The parameters for this page are shown in
Table 5-163.
Figure 5-189. LLDP Traffic Page
Table 5-163. LLDP Traffic Page Parameters
Parameter Description
Total Frames Out
This parameter specifies the number of LLDP packets sent out from switch in all
interfaces.
Total Entries Aged This parameter specifies the number of LLDP neighbor entries aged out.
Total Frames In
This parameter specifies the number of LLDP packets received in by switch in all
interfaces.
Total Frames
Received In Error
This parameter specifies the number of LLDP packets received with Error.
Total Frames
Discarded
This parameter specifies the number of LLDP packets discarded due to error and
other failure conditions.
Total TLVS
Unrecognized
This parameter specifies the number of TLVs received could not recognized
properly.
Total TLVs Discarded This parameter specifies the number of TLVs discarded due to invalidity.
To Next Page
Loading...
