1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-36
View
Clicking the VIEW tab brings up the SNMP VIEW TREE SETTINGS page (Figure 5-24),
which allows configuration of view trees. A S
UBTREE when combined with the
corresponding instance of a M
ASK defines a family of view subtrees. The VIEW NAME is
the name for a family of view subtrees. This page also displays the S
TORAGE TYPE of the
V
IEWTREE table. SNMP Group and SNMP Access settings have to be created prior to
the Group View configuration. The parameters for this page are shown in Table 5-18.
Storage Type
Use this parameter to specify whether the S
TORAGE TYPE is volatile or
non-volatile.
Context
Use this parameter to configure an SNMP context name that identifies this
group.
Figure 5-24. SNMP View Tree Settings Page
Table 5-18. SNMP View Tree Settings Page Parameters
Parameter Description
View Name This parameter specifies a View Name string.
SubTree This parameter specifies a tree OID.
Mask This parameter specifies an OID mask.
Table 5-17. SNMP Group Access Settings Page Parameters (Continued)
Parameter Description
To Next Page
Loading...
