Supermicro SSE-G24-TG4 - Rip; Rip6; Interface Statistics; Route Information

5-233
Chapter 5: Web Based Management Utility
RIP
Clicking the RIP link brings up the RIP INTERFACE STATISTICS page (Figure 5-198), which
displays RIP statistics. The parameters for this page are shown in Table 5-172.
RIP6
The RIP6 link allows you to view RIP6 statistics through the following pages:
• Interface Statistics
• Route Information
Figure 5-198. RIP Interface Statistics Page
Table 5-172. RIP Interface Statistics Page Parameters
Parameter Description
IP Address This parameter specifies the IP address.
Received Bad
Packets
This parameter specifies the number of received bad packets.
Received Bad Routes This parameter specifies the number of received bad routes.
Transmitted Updates This parameter specifies the the number of transmitted updates.