Supermicro SSE-G24-TG4 - Page 286

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-234
Interface Statistics
Clicking the INTERFACE STATISTICS tab brings up the RIP6 INTERFACE STATISTICS page
(Figure 5-199), which displays RIPng statistics. The parameters for this page are shown
in Table 5-173.
Figure 5-199. RIP6 Interface Statistics Page
Table 5-173. RIP6 Interface Statistics Page Parameters
Parameter Description
Interface ID This parameter specifies the interface identifier.
In Msg This parameter specifies the number of RIPng packets received.
In Req This parameter specifies the number of RIPng request packets received.
In Resp This parameter specifies the number of RIPng resonse packets received.
In Unk-Cmd
This parameter specifies the number of RIPng unknown command packets
received.
In Other-Ver This parameter specifies the number of RIPng other version packets received.
In Discards This parameter specifies the number of received packets discarded.
Out Msg This parameter specifies the number of RIPng packets transmitted.
Out Req This parameter specifies the number of RIPng request packets transmitted.
Out Resp This parameter specifies the number of RIPng response packets transmitted.
Out TrigUpd This parameter specifies the number of RIPng triggered updates transmitted.