1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-164
RRD6
The RRD6 link allows you to perform RRD6 related configuration through the following
pages.
• Basic Settings
• Filters
• OSPFv3
• RIP6
Basic Settings
Clicking the BASIC SETTINGS tab brings up the RRD6 BASIC SETTINGS page
(Figure 5-138), which has the single parameter option of changing the T
HROT LIMIT for
RRD6. The T
HROT LIMIT values are between 1 and 4294967295. The default value is
1000.
Figure 5-138. RRD6 Basic Settings Page
To Next Page
Loading...
