1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-122
DHCP Server
The DHCP Server link helps you to manage the DHCP server in the switch through the
following two pages:
• Basic Settings
• Pool Settings
• MAC Binding
• Port Binding
Basic Settings
Clicking the BASIC SETTINGS tab brings up the DHCP SERVER SETTINGS page
(Figure 5-101). The parameters for this page are shown in Table 5-83.
Figure 5-101. DHCP Server Settings Page
Table 5-83. DHCP Server Settings Page Parameters
Parameter Description
DHCP-Server
With this parameter you can enable or disable the DHCP server using this
configuration.
Offer-reuse Time out
(seconds)
This parameter specifies the Reuse Timeout value that can be configured in this
field, which is used by DHCP.The allowed value ranges between 1 to 120.The
default value is 5 seconds.
PING Enables/disables the PING feature.
Next Server Specifies the next server address.
To Next Page
Loading...
