1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-192
Received Octets This parameter specifies the number of bytes received.
Received Unicast
Packets
This parameter specifies the number of unicast packets received.
Received Broadcast
Packets
This parameter specifies the number of broadcast packets received.
Received Multicast
Packets
This parameter specifies the number of multicast packets received.
Received Pause This parameter specifies the number of pause packets received.
Received Undersize
Packets
This parameter specifies the number of packets received with size lesser than
minimum accepted Ethernet frame size.
Oversize Packets
This parameter specifies the number of packets received with size greater than
maximum accepted frame size of this interface.
Received CRC This parameter specifies the number of packets received with CRC errors.
Received Discards This parameter specifies the number of packets discarded due to errors.
Received Errors This parameter specifies the number of packets received with errors.
Received Unknown
Protocols
This parameter specifies the number of packets received with unknown protocol.
Received Nunicast
Packets
This parameter specifies the number of non-unicast packets received.
Received Discards This parameter specifies the number of packets discared due to errors.
Received Errors This parameter specifies the number of packets received with errors.
Received Unknown
Protocols
This parameter specifies the number of packets received with an unknown
protocol.
Transmitted Octets This parameter specifies the number of bytes transmitted.
Transmitted Unicast
Packets
This parameter specifies the number of unicast packets transmitted.
Transmitted Nunicast
Packets
This parameter specifies the number of non-unicast packets transmitted.
Transmitted Pause This parameter specifies the number of pause packets transmitted.
Transmitted Discards This parameter specifies the number of packets discarded due to transmit errors.
Transmitted Errors This parameter specifies the number of transmit errors.
Reset Statistics
This button used to reset the received and transmitted packet counter values to
0.
Table 5-141. Interface Statistics Page Parameters (Continued)
Parameter Description
To Next Page
Loading...
