Front Suspension: 2B-6
• Install the oil lock piece into the inner tube.
• Install the inner tube into the outer tube with care not
to drop the oil lock piece out.
NOTE
After installing the inner tube into the outer
tube, keep the oil lock piece into the inner
tube by compressing the front fork fully.
• Install the oil seal (1) into the outer tube using the
special tool.
Special tool
(A): 09940–52861 (Front fork oil seal
installer)
• Install the oil seal stopper ring (4) and the dust seal
(5).
– Dust seal (5)
– Oil seal stopper ring (4)
– Oil seal (1)
– Oil seal retainer (2)
–Guide metal (3)
Cylinder / Rebound spring / Cylinder ring
• Install the rebound spring and the cylinder ring to the
cylinder and install them together to the inner tube.
NOTE
The cylinder ring should be installed onto the
cylinder with its oil passage notches “A”
facing downward.
I705H1220036-01
1
(A)
I705H1220016-03
4
5
I705H1220017-03
5 4 1
2 3
I705H1220034-02
I705H1220019-01
“A”
I705H1220025-02
To Next Page
Loading...
