0B-21 Maintenance and Lubrication:
Specifications
Tightening Torque Specifications
B705H10207001
NOTE
The specified tightening torque is also described in the following.
“Chassis Bolt and Nut Inspection (Page0B-17)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque Specifications in Section
0C (Page0C-7)”.
Special Tools and Equipment
Recommended Service Material
B705H10208001
NOTE
Required service material is also described in the following.
“Lubrication Points (Page0B-2)”
Special Tool
B705H10208002
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Spark plug 11 1.1 8.0 )(Page0B-3)
Oil drain plug 23 2.3 16.5 )(Page0B-9)
Final reduction gear drain plug 12 1.2 8.5 )(Page0B-10)
Final reduction gear oil level check plug 16 1.6 11.5 )(Page0B-10)
Exhaust pipe bolt 23 2.3 16.5 )(Page0B-16)
Muffler mounting bolt 23 2.3 16.5 )(Page0B-16)
Muffler connecting bolt 23 2.3 16.5 )(Page0B-16)
Material SUZUKI recommended product or Specification Note
Engine Oil SAE 10W-40, API SF/SG or SH/SJ
with JASO MA
— )(Page0B-10) / )(Page0B-
10)
09900–20803 09900–20805
Thickness gauge Tire depth gauge
)(Page0B-4) / )(Page0B-
5)
)(Page0B-15)
09900–26006 09930–10121
Engine tachometer (solar
cell type)
Spark plug wrench set
)(Page0B-19) )(Page0B-3)
To Next Page
Loading...
