Suzuki GSF650A - Page 226

1D-14 Engine Mechanical:
• Apply thin coat of the engine oil to the O-rings and
install the ISC valve assembly.
CAUTION
!
Replace the O-rings with new ones.
Special tool
: 09930–11950 (Torx wrench)
Tightening torque
ISC valve mounting screw (a): 3.5 N·m (0.35 kgf-
m, 2.5 lbf-ft)
• Apply thin coat of the engine oil to the O-rings and
install the plate.
CAUTION
!
Replace the O-rings with new ones.
NOTE
The boss “C” of the outside.
• Connect the ISC valve hoses securely.
• Apply thin coat of the engine oil to the new cushion
seal (2) and the O-ring (3).
CAUTION
!
Replace the cushion seal and O-ring with the
new ones.
• Apply thin coat of the engine oil to the new O-rings (4).
CAUTION
!
Replace the O-rings with the new ones.
• Assemble the fuel delivery pipes as shown.
(a)
I718H1140337-02
“C”
I718H1140338-01
I717H1140027-01
2
3
I718H1140340-02
4
I718H1140341-02
I718H1140342-01