Engine Mechanical: 1D-65
• Check the gearshift cam stopper moves smoothly.
• Locate the gearshift cam in the neutral position.
• Install the gearshift cam stopper plate (5).
NOTE
Align the gearshift cam pin “B” with the
gearshift cam stopper plate hole “C”.
• Apply a small quantity of THREAD LOCK to the
gearshift cam stopper plate bolt and tighten it to the
specified torque.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
Tightening torque
Gearshift cam stopper plate bolt (b): 13 N·m (1.3
kgf-m, 9.5 lbf-ft)
• Apply a small quantity of THREAD LOCK to the
gearshift arm stopper (6) and tighten it to the specified
torque.
: Thread lock cement 99000–32030
(THREAD LOCK CEMENT SUPER 1303 or
equivalent)
Tightening torque
Gearshift arm stopper (c): 19 N·m (1.9 kgf-m, 13.5
lbf-ft)
1
2
3
4
I718H1140244-01
“A”
(a)
1
I717H1140177-02
5
“B”
“C”
I717H1140178-01
(b)
I717H1140179-02
(c)
6
I717H1140180-01
To Next Page
Loading...
