Suzuki GSF650A - Page 278

1D-66 Engine Mechanical:
• Install the gearshift shaft assembly (7) and washer (8)
as shown.
NOTE
Pinch the gearshift arm stopper (6) with
return spring ends “D”.
• Install the washer (9) and snap ring (10).
CAUTION
!
Never reuse a snap ring.
Oil Pump
• Install the O-ring to the oil pump and apply SUZUKI
SUPER GREASE to it.
CAUTION
!
Replace the O-ring with a new one.
NOTE
Set the oil pump shaft end “A” to the water
pump shaft. Refer to “Water Pump
Construction in Section 1F (Page 1F-12)”.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
• Install the oil pump with the oil pump mounting bolts
and then tighten them.
• Install the washer (1) and pin (2).
NOTE
Be careful not to drop the washer (1) and pin
(2) into the crankcase.
• Install the oil pimp driven gear (3).
• Install the snap ring (4).
CAUTION
!
Never reuse a snap ring.
6
7
8
“D”
I717H1140181-02
9
10
I717H1140182-01
“A”
I717H1140183-01
1
2
I717H1140184-01
3
4
I717H1140185-01