2D-21 Wheels and Tires:
Installation
1) Install the collar (1) and front wheel speed sensor
bracket (2) into the right side of the wheel.
2) Align the recess “A” on the speed sensor bracket
with the stopper “B” on the right front fork.
3) Install the front wheel with the front axle and tighten
the front axle temporarily.
WARNING
!
The directional arrow on the tire should point
to the wheel rotation, when remounting the
wheel.
4) Tighten the brake caliper mounting bolts to the
specified torque.
Tightening torque
Front brake caliper mounting bolt (a): 25 N·m (
2.5 kgf-m, 18.0 lbf-ft)
WARNING
!
After remounting the brake calipers, pump
the brake lever until the pistons push the pad
correctly.
1
I717H2240009-01
2
I717H2240010-01
“A”
“B”
I717H2240011-01
I717H2240012-01
(a)
(a)
I717H2240013-02
To Next Page
Loading...
