Suzuki GSF650A - Page 433

Wheels and Tires: 2D-22
5) Tighten the front axle to the specified torque.
Special tool
(A): 09944–28320 (Hexagon socket (19
mm))
Tightening torque
Front axle (a): 100 N·m (10.0 kgf-m, 72.5 lbf-ft)
6) Move the front fork up and down 4 or 5 times.
7) Tighten the axle pinch bolt to the specified torque.
Tightening torque
Front axle pinch bolt (b): 23 N·m (2.3 kgf-m, 16.5
lbf-ft)
8) Install the front wheel speed sensor mounting bolts.
Refer to “Front Wheel Speed Sensor Removal and
Installation in Section 4E (Page 4E-70)”.
9) Check the clearance between the front wheel speed
sensor and sensor rotor. Refer to “Front Wheel
Speed Sensor Removal and Installation in Section
4E (Page 4E-70)”.
(A)
I717H2240014-01
I717H2240015-02
(b)
I717H2240016-01