Suzuki GSX1300R - Page 302

1D-81 Engine Mechanical:
Oil Pipe
• Install the new O-ring to the oil pipe and apply grease
to it.
CAUTION
!
Use a new O-ring to prevent oil leakage.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
• Install the new gasket washers (1).
CAUTION
!
Use the new washers to prevent oil leakage.
• Install the cushion (2).
• Tighten the oil pipe bolts (3) and oil pipe union bolt (4)
to the specified torque.
NOTE
• Apply a small quantity of thread lock to the
oil pipe bolts (3).
• Apply engine oil to the oil pipe union bolt
(4).
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
Tightening torque
Oil pipe bolt (M6) (a): 10 N·m (1.0 kgf-m, 7.0 lb-ft)
Oil pipe union bolt (M14) (b): 24 N·m (2.4 kgf-m,
17.5 lb-ft)
Oil Filter
• Install the oil filter with the special tool. Refer to
“Engine Oil and Filter Replacement in Section 0B
(Page 0B-10)”.
Special tool
(A): 09915–40610 (Oil filter wrench)
I823H1140234-01
1
I823H1140235-02
2
4
I815H1140062-01
(a)
3
(b)
4
I815H1140063-02
(A)
I823H1140238-01