Suzuki GSX1300R - Page 304

1D-83 Engine Mechanical:
• Install a new gasket (9) and the dowel pins.
CAUTION
!
Use a new gasket to prevent oil leakage.
• Apply grease to the lip of the gearshift cover oil seal.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
• Tighten the gearshift cover bolts (10) to the specified
torque.
Tightening torque
Gearshift cover bolt (c): 10 N·m (1.0 kgf-m, 7.0 lb-
ft)
Water Pump
• Apply grease to new O-ring (1).
CAUTION
!
Use the new O-ring to prevent oil leakage.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
• Tighten the water pump mounting bolts (2) to the
specified torque.
Tightening torque
Water pump mounting bolt (a): 10 N·m (1.0 kgf-
m, 7.0 lb-ft)
Generator
• Install the generator component parts (1). Refer to
“Generator Removal and Installation in Section 1J
(Page 1J-6)”.
9
I815H1140115-01
(c)
10
I815H1140116-01
1
I823H1140246-04
(a)
2
I823H1140247-02
1
I815H1140125-01