Suzuki GSX1300R - Page 53

Maintenance and Lubrication: 0B-23
Compression Pressure Check
B815H20206025
Refer to “Compression Pressure Check in Section 1D
(Page 1D-3)”.
Oil Pressure Check
B815H20206026
Refer to “Oil Pressure Check in Section 1E (Page 1E-
5)”.
SDS Check
B815H20206027
Refer to “SDS Check in Section 1A (Page 1A-17)”.
Specifications
Tightening Torque Specifications
B815H20207001
NOTE
The specified tightening torque is also described in the following.
“Chassis Bolt and Nut Inspection (Page 0B-21)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-9)”.
35 Rear sprocket nut 60 N⋅m (6.0 kgf-m, 43.5 lb-ft)
(o)
35
I815H1020065-02
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Exhaust pipe bolt 23 2.3 16.5 )(Page 0B-3)
Exhaust pipe mounting bolt 23 2.3 16.5 )(Page 0B-3)
Muffler connecting bolt 23 2.3 16.5 )(Page 0B-3)
Muffler mounting bolt 25 2.5 18.0 )(Page 0B-3)
Spark plug
11 1.1 8.0
)(Page 0B-9) /
)(Page 0B-9) /
)(Page 0B-9)
Oil drain plug 23 2.3 16.5 )(Page 0B-11)
Oil filter 20 2.0 14.5 )(Page 0B-12)
Rear axle nut 100 10.0 72.5 )(Page 0B-16)
Rear master cylinder rod lock-nut 18 1.8 13.0 )(Page 0B-18)