Suzuki GSX1300R - Page 651

Exterior Parts: 9D-19
Cowling Brace
Removal
1) Remove the body cowling.
2) Remove the intake pipes.
3) Remove the combination meter (1).
4) Remove the wire clamps (2).
5) Remove the steering damper mounting bolt (3).
6) Remove the cowling brace (4).
Installation
Install the cowling brace in the reverse order of removal.
Pay attention to the following points:
• Tighten the cowling brace mounting bolts to the
specified torque.
Tightening torque
Cowling brace mounting bolt (a): 32 N·m (3.2 kgf-
m, 23.0 lb-ft)
• Before installing the steering damper mounting bolt,
apply grease to the steering damper bearing and dust
seals.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
1
I823H1940032-01
1
I823H1940033-01
2
I823H1940034-01
3
I823H1940035-01
4
I823H1940036-01
(a)
I823H1940037-01
I823H1940038-01