Svantek SV 200A User Manual

111
SV 200A User Manual
Downloading enables choosing which files are going to be downloaded with AFD. Logger files
containing measurement results are most commonly used.
Note: CSV and WAVE files contain raw, uncompressed data. Make sure that bandwidth is
sufficient. If 3G modem is used, make sure that SIM-card data plan covers large transfers.
Downloading period setting determines how often data from SV 200A will be downloaded to the PC.
Five different periods can be chosen: hourly, daily (at specified hour), weekly (at specified weekday,
at specified hour), monthly (at specified day of month, at specified hour) and custom (specified time
interval between downloads). These settings applie only when Files to download are selected.
Automatic cleaning enables choosing which files are going to be erased from the instrument’s memory
after downloading.
Cleaning period determines how often data from SV 200A will be erased. Five different periods can be
chosen: hourly, daily (at specified hour), weekly (at specified weekday, at specified hour), monthly (at
specified day of month, at specified hour) and custom (specified time interval between downloads).
This setting applies only when Automatic cleaning is active. Files are erased from the instrument only
after they had been previously downloaded with AFD.
System validation section enables configuring the following settings:
• system checks with built-in electrostatic actuator,
• validation of instrument settings after cleaning measurement files,
• validation of instrument settings after performing system check (if enabled),
• automatic synchronization of real time clock,
• verification of instrument settings.
Starting session
To start Automatic Files Download session, click Start AFD button.
The AFD session will start with global settings configured in the
Options window. Download will begin after the time defined in
Downloading period is over.
It is also possible to override global file saving settings of AFD session
by clicking the File Conf. button next to each individual station in the
Station list.
To start the Automatic Files Download session and download files
from SV 200A, immediately click Download now button.
Stopping session
To finish the Automatic Files Download session after downloading all
measurement files, click the Stop AFD button.

Svantek SV 200A Specifications

General

Brand	Svantek
Model	SV 200A
Category	Measuring Instruments
Language	English