Svantek SV 200A User Manual

126
SV 200A User Manual
Parameters and global settings
Word
number
Name
Comment
0
0xnn04
[04, nn=block’s length]
1
MeasureStartDate
measure start date (cf. App. B.5)
2
MeasureStartTime
measure start time (cf. App. B.5)
3
DeviceFunction
device function:
1 - SOUND LEVEL METER,
2 - 1/1 OCTAVE analyser,
3 - 1/3 OCTAVE analyser
4
MeasureInput
measurement input type:
2 - Microphone
5
Range
measurement range:
2 - SINGLE
6
UnitFlags
unit flags:
b1 - if set to 1: overload occurred
b9 – measurement start synchronized with GPS
other bits - reserved
7
RepCycle
repetition cycle:
0 - infinity
nnnn - number of repetitions (1  1000)
8
NofProf
number of profiles (3)
9
StartDelay
start delay time
10..11
IntTimeSec
integration time specified in seconds
12
reserved
13
LeqInt
detector's type in the LEQ function:
0 - LINEAR,
1 - EXPONENT.
14
SpectrumFilter
1/1 or 1/3 OCTAVE analysis filter:
1 - Z, 2 - A, 3 - C
15
SpectrumBuff
1/1 or 1/3 OCTAVE logger:
0 - off,
8 - logger with LEQ values
in other cases reserved
16
SpectrumDetector
1/1 or 1/3 OCTAVE analysis detector:
0 - LIN.,
1 - FAST,
2 - SLOW
17
StartSync
Synchronization the start of measurement with RTC
-1 - synchronization to 1 sec.
0 - switched off.
1 - synchronization to 1 min.
15 - synchronization to 15 min.
30 - synchronization to 30 min.
60 - synchronization to 1 hour.
18
reserved
19
reserved

Svantek SV 200A Specifications

General

Brand	Svantek
Model	SV 200A
Category	Measuring Instruments
Language	English