last calibration type:
0 - none,
1 - auto (using auto-calibration feature),
2 - remote (using remote #1,Q command),
3 - factory,
4 - system check (using built-in actuator),
5 - manual (using MENU->Function->Calibration-
>By Measurement)
outdoor filter:
0 - OFF,
1 - ON
outdoor filter type:
0 - ENVIRONMENT,
1 - AIRPORT
temperature compensation for microphone:
0 - switched off, 1- switched on
Logger files splitting mode:
0 - off.
-1 - The file is created for each measurement cycle.
15 - The file is created every 15 min synchronized to
RTC.
30 - The file is created every 30 min synchronized to
RTC.
60 - The file is created every 1 hour synchronized to
RTC.
1440 - The file is created on the specified times.
Logger files splitting time:
-1 - off.
0:1439 - Time in minutes.
Valid only if SplitMode is equal 1440.
Logger files splitting time:
-1 - off.
0:1439 - Time in minutes.
Valid only if SplitMode is equal 1440.
Logger files splitting time:
-1 - off.
0:1439 - Time in minutes.
Valid only if SplitMode is equal 1440.
Logger files splitting time:
-1 - off.
0:1439 - Time in minutes.
Valid only if SplitMode is equal 1440.