• Compensation Filter, which enables setting of the compensation
filter: Microphone (for laboratory purposes only) and Outdoor
(Environmental, Airport or Off (none)).
Display section contains positions:
• Screen Off, which enables setting the period of the screen switching
off after last use of any key. Selecting Off disables this function;
• Auto Rotate, if switched On, activates the proper view on the
screen: vertical view mode in the situation when the instrument is in
vertical position or any other views when the instrument is in
horizontal position.
Instrument section contains positions:
• Wireless, which enables switching on/off all communication modules
(Radio) and activating wireless communication modules
(3G modem, WLAN Mode or Bluetooth) and GPS in the case the
Radio position is On.
WLAN Mode switches on/off the mode of the WLAN interface to
access point (WA), infrastructure (WI).
• LAN, which enables activating the LAN interface.
• USB, which enables configuring the transmission speed of USB port:
12 Mbps or 480 Mbps.
• RTC, which enables setting the internal real-time clock of the
instrument.
For setting the RTC, it is necessary to select one of the field in the RTC
screen (hh:mm:ss) and press the key, as a result of which the
selected field changes it’s background to the white. Select the necessary
hour, minute or second with the or key and confirm made
changes by the key.
To Next Page
Loading...
Need help?
General
