2 Safety
CyFlow
®
Cube 8 | Operating Manual | May 2018 | Revision 032 11
2.4.2 User qualification table
× = activity can be performed by the user
¹ = please refer to the maintenance table for detailed instructions (see
chapter 9 Maintenance on page 44).
2.5 Environmental conditions
The device may only be used in laboratories. The specified ambient
temperature and relative humidity conditions must be maintained at all times.
The laboratory environment must be clean. Direct sun light should be
avoided.
Relative humidity: between 20 % and 85 %, non-condensing.
Activity Instructed
personnel
Qualified
personnel
Authorised
service
personnel
Transport × ×
Installation ×
Operation × × ×
Cleaning × × ×
Decontamination × ×
Maintenance ×¹ ×¹ ×
Technical service ×
Uninstalling × ×
Packing × ×
Disposal × ×
CyFlow
®
Cube 8
Configuration
Operating temperature range
V1, V2, V4, V5, V6,
V7, V8, V9, V10,
V11
15 °C to 30 °C
N1 15 °C to 30 °C
To Next Page
Loading...