12 Software description
136 CyFlow
®
Cube 8 | Operating Manual | May 2018 | Revision 032
12.5 Panes
In the panes of the software window, the functions for acquiring data are
provided, and informations concerning the currently open Worklist item or
Playlist item are displayed.
The panes that are available in the panes area can be selected and
deselected in the Views tab of the Ribbon (see chapter 12.4.13 Views tab on
page 123). To get back to the default view, click the Default Position button
in the Views tab of the Ribbon.
The panes can be positioned on the screen as required (see chapter 12.2
Views of the software window on page 52). To get back to the default view,
click the Default Position button in the Views tab of the Ribbon.
The Playlist pane is only displayed in Playlist mode and is described in a
separate chapter (see chapter 12.7 Playlist pane on page 154). The Playlist
pane is displayed in the panes area by default.
The Worklist pane is only displayed in Worklist mode and is described in a
separate chapter (see chapter 12.6 Worklist pane on page 146). The
Worklist pane is docked to the bottom of the Workspace area by default.
The other panes are described in this chapter and comprise:
FCS File Information pane,
Results Hierarchy pane,
Settings pane,
Acquire pane,
Setup pane.
To Next Page
Loading...