12 Software description
CyFlow
®
Cube 8 | Operating Manual | May 2018 | Revision 032 97
12.4.8 Worklist tab
The Worklist tab provides controls for modification of all aspects of a Worklist
including Worklist items, panels, Workspace files and instrument settings.
The Worklist tab is only available in Worklist mode.
General group
The General group contains options to open, save and edit a Worklist.
The General group contains the following buttons:
New Worklist: Click the button to create a new Worklist
Open Worklist: Click the button to open an existing Worklist.
Save: Click the button to save the current Worklist with the same name.
Save As: Click the button to save the current Worklist with a new name.
Select Columns: Click the button to open a dialogue to customise the
Worklist:
To display or hide the columns in the Worklist, select or deselect the
check boxes next to the columns. Some check boxes are disabled, the
corresponding columns are always displayed.
Columns can be reordered by dragging and dropping except for the first
three columns.
The "Lab #" and "Sample ID" columns can be renamed by
double-clicking on the name and entering a new name of up to 30
characters. A "locked" icon on the right of a column name indicates that
the name cannot be changed.
To get back to the default settings, click the Defaults button in the
dialogue.
For a description of the columns, see chapter 12.6 Worklist pane on
page 146.
Clear LMD: Click the menu item to clear the listmode data from the
Worklist item. The check mark in the "Acquired" column is no longer
displayed indicating that new data can be acquired on this Worklist item.
This option is only available if data are acquired on this Worklist item.
Clear Item: The option is only enabled if a single Worklist item is
selected that is the first or last item of a panel. Click the menu item to
clear all settings from the Worklist item. This option is only available if no
data are acquired on this Worklist item.
To Next Page
Loading...