5 Installation
CyFlow
®
Cube 8 | Operating Manual | May 2018 | Revision 032 23
5 Installation
5.1 Positioning the device
Heavy weight
When moving the device (packed or unpacked) or removing it from its
packaging, a person is exposed to a high risk of damaging his or her body
due to the heavy weight of the device.
At least two persons are required for transport and installation.
Carefully select the place where to position and operate the device. Comply
with the following criteria when positioning the device:
Place the device on a solid, dry and clean horizontal surface.
Avoid smoke, dust, vibrations, direct sunlight and any source of direct
heat.
Leave a minimum distance of 15 cm between the back of the device and
a wall to keep the ventilation effective.
Do not block the ventilation grid at the back of the device.
Do not place any objects on the device.
5.2 Installation and uninstallation
Installation, connection, disconnection and uninstallation may only be
performed by authorised service personnel and in conformity with the
applicable national rules and regulations.
5.3
To Next Page
Loading...