SYSMEX CyFlow Cube 8 - Logging in and Logging out

6Operation
CyFlow
®
Cube 8 | Operating Manual | May 2018 | Revision 032 25
4. Start the software by double click the CyFlow
®
Software icon.
– The log-in dialogue is displayed.
– The device is, by default, set in a standard mode.
6.2.2 Logging in and logging out
Each user is assigned to a user role. Each user role has specific privileges.
Some functions of the software are not available for each user role and
availability depends on the assigned privileges.
User management
Logging in
Requirements
 The log-in dialogue is displayed.
 User access must be set up and the user name and password must be
known to log into the software.
Procedure
1. Enter the user name.
2. Enter the password.
3. Click the Log-in button.
– The log-in dialogue closes.
– The user role dialogue will be displayed.
Role Privileges
Service operator User administration
Worklist creation
Worklist management
Sample analysis
Manage Workspace and settings
Create comp setup
User administrator User administration
Parameter properties
Assay developer Manage Workspace and settings
Worklist creation
Worklist management
Sample analysis
Create comp setup