SYSMEX CyFlow Cube 8 - Page 98

12 Software description
98 CyFlow
®
Cube 8 | Operating Manual | May 2018 | Revision 032
Panel group
The Panel group contains options to edit a panel of the Worklist.
The Panel group contains the following buttons:
 Save: Click the button to save the panel with the same name.
 Save as: Click the button to save the panel with a new name.
When saving a panel, the full path and file extension are stripped and the
Workspace name is used as an identifier. If there are multiple Workspace
files present within the panel with the same name, a unique identifier is
added to the Workspace file name to differentiate the Workspace files.
 Replace: Click the panel to replace the panel. When replacing a panel,
the selected panel in the Worklist will be removed, and the chosen panel
will be inserted into the Worklist, with the first item of the panel at the
same position the first item of the previous panel was at.
 Add Item: Click the button to add an item to the panel. The option will
duplicate the last row in the panel. The option is only enabled when at
least one undefined item is directly below the panel.
 Clear Panel: Click the button to clear the panel from the Worklist and to
reset the corresponding Worklist items to an undefined state. The option
is disabled if LMD files are present in any of the selected panels.
Workspace group
The Workspace group contains options to edit the Workspace.
The Workspace group contains the following buttons:
 New Workspace: Click the button to create a new Workspace file. The
option will create a default Workspace file for the selected Worklist item.
The option is disabled when more than one Worklist item is selected or
when a compensation setup panel is active.
 Save: Click the button to save the Workspace file with the same name.
 Save As: Click the button to save the Workspace file with a new name.
 Replace: Click the button to replace a Workspace file.