12 Software description
CyFlow
®
Cube 8 | Operating Manual | May 2018 | Revision 032 135
Histogram Smoothing group
The options in the Histogram Smoothing group are available when single
parameter plots in a gallery or an overlay plot containing single parameter
plots are selected.
The options allow smoothing to be applied to histogram plots to improve the
visual appearance without affecting statistical results. For information on
histogram smoothing options, see chapter Histogram Smoothing group on
page 126.
3D group
The 3D group contains the following option:
Angle (deg.): The option is available when an overlay plot in 3D mode is
selected. Enter a value or use the up/down arrows to rotate the 3D
overlay plot between 5 and 85 degrees.
To Next Page
Loading...