Tascam DR-40 - Sound and File Management Issues

TASCAM DR-40 113
The input level is low.
8
Conrm that the input level setting is not too low.
•
Conrm that the output level of a connected external
•
device is not too low.
The sound I am trying to record sounds distorted.
8
Conrm that the input level setting for recording (
•
INPUT
LEVEL ) is not too high.
Do the built-in eects work?
•
The playback sounds unnatural.
8
Conrm that the playback speed is not being adjusted.
•
Conrm the setting of the playback equalizer.
•
Conrm that the level alignment function is not enabled.
•
Do the built-in eects work?
•
I cannot erase a le.
8
Conrm that you are not trying to erase a le that has been
•
copied from a computer after being write-protected.
This unit’s les do not appear on the computer.
8
Conrm that the unit is connected to the computer using its
•
USB port.
Conrm that USB hubs are not used.
•
Conrm that the unit is not recording or in recording
•
standby mode.
15 – Troubleshooting