Tascam DR-40 - Quick Menu Screen

TASCAM DR-40 87
Quick menu screen
To show the Quick menu screen, press the QUICK button
while the Home Screen is open. The contents of this screen
depend on the state of the unit at the time when the QUICK
button is pressed.
When stopped with the Home Screen open
Deletion, division, and level alignment of the current playback
le can be selected.
DELETE :
The current le can be deleted. (See “Deleting the selected le
(Quick Delete)” on page 88.)
DIVIDE :
The current le can be divided.
(See “Dividing the selected le (Divide)” on page 89.)
LEVEL ALIGN :
The perceived overall sound pressure can be increased to
enhance listenability. (See “Increasing the perceived overall
sound pressure to enhance listenability (Level Alignment)” on
page 90.)
MIX DOWN :
This function combines four channels (with a le each for
channels 1/2 and channels 3/4) into one 2-channel L/R le.
When using this, you can make eect level, volume level
and stereo position settings freely on the MIXER screen. (See
“Mixdown” on page 91.)
During playback with the Home Screen open, or while the
Playback Control screen is open
Only level alignment can be selected.
During recording standby with the Home Screen open
You can select the settings of level control or left-right
channels for the built-in stereo microphones.
Select LEVEL CTRL , and press the ENTER/MARK button to
open the level control setting pop-up window.
7 – Quick Operations