Tascam DR-40 - Dual Recording and Overdub Playback Features

84 TASCAM DR-40
4 Use the + or − button to set the equalizer. TREBLE ,
MIDDLE , and BASS indicate that adjustment in the high,
middle, or low frequency range is enabled, and + and –
indicate that the sound level in that range is increased
or decreased, respectively.
Options: OFF (factory setting), TREBLE + , TREBLE - ,
MIDDLE + , MIDDLE - , BASS + , BASS -
5 When finished, press the (HOME) [8] button to
return to the Home Screen.
Moving back a few seconds for replay
(jump-back playback)
Press the PLAY [7] button during playback to move back a
few seconds (adjustable) and restart playback. (Jump-back
playback).
If you nd a favorite passage of music or lyrics during
playback, press the PLAY [7] button to go back a few
seconds and replay that passage.
The jump-back time is set as a JUMPBACK setting.
1 Press the MENU button to open the MENU screen.
2 Use the + or − button to select PLAY SETTING , and press
the ENTER/MARK or / button.
PLAY SETTING screen appears.
3 Use the + or − button to select JUMPBACK , and press the
ENTER/MARK or / button.
4 Use the + or − button to set the jump-back time.
The setting options include 1 SEC. (1 second) to 10 SEC.
(10 seconds) in increments of 1 second, and 20 SEC. (20
seconds), and 30 SEC. (30 seconds) (default: 3 SEC ).
5 When finished, press the (HOME) [8] button to
return to the Home Screen.
Playback of files recorded using dual
recording
When playing back les that have been made using dual
recording, press and hold the 1/2 [SOLO] or 3/4 [SOLO]
buttons to alternate monitoring of the two les created using
dual recording.
NOTE
This function (using the 1/2 [SOLO] and 3/4 [SOLO] buttons
to switch between les) nds the les by the rst 11 characters
6 – Playback